What to do if the lifting adjustable desk can't go up Common problems and solutions of electric lifting desk

Abstract: Electric lifts are widely used because of their convenient operation and powerful functions. But sometimes when using the electric lift table, it will not go up, so what should I do if the lift desk cannot go up? How to repair the electric lift table if it does not go up? It needs to be lowered and reset before it can be used normally. The following is an introduction to common problems and solutions of electric lift tables.

 

1. What to do if the adjustable desk cannot be raised

There is a display on the adjustable table, but there is no response when it is raised or lowered, indicating that it needs to be reset.

If it is displayed on the control handle, press the down button, and after RST appears, continue to press the down button, but there is no response. At this time, you can try to unplug the power cord and wait for 5 minutes after the light on the display screen of the control handle goes out. Then plug in the power cord again.

If the control handle continues to display RST after plugging in the power, then press and hold the down button directly and do not let go, then the program in the controller will perform a reset operation, and the height of 62.0/60 metric system displayed on the control handle indicates that the reset is normal. Then it can be used normally.

 

2. Common problems and solutions of electric lifting table

1. The lifting speed difference or asynchronous situation occurs in the double-motor electric lifting table

This may be caused by the current or the lack of alignment during installation. If it is due to the current, you should press and hold the reset button to reset to the original state. If it is not installed flat during installation, you need to lower the electric table and reset it, and then disassemble the raised table legs for installation. .

2. The electric lifting table cannot be lifted within half a year

First of all, check whether the place where the table is placed is often humid and humid. If the place is placed with heavy humidity, water vapor may cause corrosion of the internal structure of the table legs. In this case, you should disassemble the lifting table legs to check whether they are lifted Smooth, whether there is rust, try to put it in a dry place when using the electric lifting table.

3. The steel frame of the electric lift table is rusted

This problem should be solved directly by the merchant who bought it. The steel frame of the normal lifting table is made of stainless steel, and there is basically no possibility of rust. If it rusts in a dry place, you can basically confirm that you bought an unqualified electric lifting table, and you can negotiate with the merchant for compensation or replacement.