Electric adjustable desks have become the new norm in modern offices. The biggest difference between electric adjustable desks and ordinary desks is that they can be raised and lowered freely. What are the structures of the electric standing desking desk? How to install the electric standing desking desk? Let's find out below.

What are the structures of the electric standing desk

The general structure of the electric standing desk is composed of motor, table board, standing desk frame, table legs, etc. Before choosing the standing desk, you have to understand these core configurations in detail, and you can start according to your own situation and needs when purchasing.

1. Motor: The double motor is more stable, the lifting is faster, the noise is smaller, the price is higher, and the price of the single motor is affordable, which can meet the basic needs.

2. Table legs: The lifting height range of the three-section table suit is greater than that of the two-section table suit. The load-bearing strength of the electric standing desk is an important factor affecting the stability of the table. It is recommended to buy a table with a load capacity of more than 70 kg to ensure that you can rely on the table without worry when stacking items and standing on a daily basis.

3. standing desk frame material: The table frame material and structure are the key to ensuring stability. The stability of the cold-rolled steel table is at the leading level, and it is a choice with closed eyes.

4. Table board material: mainstream board materials generally include solid wood, slate, environmental protection board, tempered glass, etc. In terms of price, solid wood and slate are more expensive, environmentally friendly boards are more cost-effective, and glass is cheaper. In terms of environmental protection level, EO >E1>E2.
 
Electric standing desk installation steps

The electric standing desk desk is divided into two groups, four packs, one large wooden table, and three packs of installation accessories. Judging from the composition of accessories, it is still quite rich, covering important parts such as electric standing desking desk legs, supporting table legs, supporting beams, conduit boxes, and controllers.

1. First of all, the first step of installation is to fix the beam, because the holes reserved on the beam are in different positions, which can adapt to different desktops. For example, the desktop is a 120cm x 70cm table, and the screws are 304 stainless steel, so there is definitely no problem with durability.

2. After the beam is fixed, it is time to install the legs of the electric desk. This lift desk is a rectangular three-section lifting column, commonly known as a dual motor. table foot installation
It is also more convenient, just push the table legs into the inside of the beam, and then fix it with 4 stainless steel screws. 3. In terms of installation methods, the table legs are divided into normal installation and inverted installation. The vertical installation lifting area is located at the table board, and the inverted installation lifting area is located at the table foot. The vertical installation is smoother than the inverted installation. . What needs to be installed is the table legs. The table legs are generally vertical to the table legs, and the longitudinal dimension is longer, which can ensure the stability of the table legs. The table legs are basically level with the table board, so you don't have to worry about tripping the elderly and children.

4. Four additional foot pads should be installed on the bottom of the table legs. On the one hand, it can prevent the stainless steel of the table legs from wearing the bottom surface, and the rubber feet can protect and prevent slipping. On the other hand, if the indoor ground is uneven, the foot pads can be adjusted and lowered, which can also play a role in leveling.

5. After the foot pads are installed, the bench can be turned over, and the bench is basically formed. The beams of the work table are connected by a U-shaped structure, and the fixing plate is welded to the positions of the lifting columns at both ends of the work table to strengthen the structural strength. This structural design contributes a lot to the overall strength and stability of the bench.

6. The next step is to install the support frame (a very large trapezoidal metal plate with a bottom edge).
Large weight, so as to minimize deformation of the desktop.

7. Since this electric standing desk desk adopts dual motors, it is equipped with an independent control box, which is connected to the left and right motors through two cables, and is also equipped with a power cord to connect to the external power supply. Both the control box and the cables connected to the motor can be hidden inside the load-bearing beam, not only the appearance is neat, but also the overall sense of the eye is stronger.

8. Don't worry about being disconnected anymore. The standing desk also digs a trench in the upper right corner of the interior to leave a wireless charger, which is fixed on the bottom of the table through a bracket, which will not protrude from the bottom, reducing the thickness of the table and mobile phone, and realizing the adaptability of the wireless charging function. In addition to wireless charging, the electric standing desk desk also provides a clean under-the-desk storage metal box, which can store under-the-desk sockets, cables, chargers and other sundries, and there is a wire hole in the middle.

9. The next step is to place the table on the bracket and fix the screws to the embedded nuts on the table, which is very convenient. Before installing the electric standing desk desk, you have to punctuate yourself first, then drive in the expansion screws with an electric drill, and finally install the screws, which is quite troublesome. For users, the installation process is quite time-saving, labor-saving and clean. The lifting controller also has a pre-embedded nut, and the general controller is on the right side, which is just right for lifting most right hands. In addition to the digital display panel, there are three buttons on the bottom of the controller.

10. Finally, put the product on it and arrange the wires. The whole installation process is enough.