Raising a stand-up desk can vary slightly depending on the type of mechanism it uses (manual, electric, or pneumatic). Here’s a step-by-step guide for each type:
Manual Standing Desk
Manual standing desks often use a crank or a hand-operated mechanism to adjust the height.
-
Locate the Crank: Find the hand crank, usually located on the side or front of the desk.
-
Turn the Crank: Rotate the crank clockwise to raise the desk. Turn it counterclockwise to lower the desk.
-
Adjust to Desired Height: Keep turning the crank until the desk reaches your desired height. Ensure the desk is stable before stopping.
Electric Standing Desk
Electric standing desks use a motor and can be adjusted with the push of a button.
-
Locate the Control Panel: Find the control panel, typically located on the edge of the desk.
-
Press the Up Button: Press and hold the “up” button to raise the desk. Some desks have preset height buttons for convenience.
-
Release at Desired Height: Release the button when the desk reaches your preferred height. Make sure the desk stops smoothly and is stable.
Pneumatic Standing Desk
Pneumatic standing desks use gas cylinders and are adjusted by releasing a lever.
-
Locate the Lever: Find the lever, usually positioned under the desk or on the side.
-
Squeeze the Lever: Squeeze and hold the lever to engage the pneumatic mechanism.
-
Raise the Desk: While holding the lever, lift the desk to your desired height. The gas cylinder will assist in the lifting process.
-
Release the Lever: Release the lever to lock the desk in place at the desired height.
General Tips for Adjusting Your Desk
-
Remove Obstacles: Ensure there are no obstacles or cables that could obstruct the desk’s movement.
-
Secure Items: Secure or remove items on the desk that might tip over or fall during the adjustment.
-
Check Stability: After adjusting, check the desk’s stability. Make sure it’s level and secure before use.
-
Use Both Hands (if necessary): For manual and pneumatic desks, it might be helpful to use both hands to ensure even lifting.
By following these steps, you can easily raise your stand-up desk to a comfortable working height.
